Ungraded card in a top loader
This frame is cut for a RAW case specifically — not a universal opening with your card behind it. The aperture is drawn from that case's own outline, inset a millimetre all round, so the card fills the opening and no bare window shows at the edges or in the corners.
Pane includedNo visible hardwarePatent pendingMade in the USA
Made to order. Ships in 5–7 business days, UPS Ground with tracking. Flat $9.95, free over $99.
One frame body, one back panel, one acrylic pane cut to size. Nothing to assemble and nothing else to buy except the wall screw.
| Fits | Ungraded card in a top loader |
| Case size | 76.5 × 100.2 × 1.6 mm |
| Frame size | 5 × 7 in · 15.5 mm deep |
| Pane | 3.5 x 4.5 in acrylic, 3 mm, cut to size |
| Material | PETG, printed to order |
| Hangs on | One #6 screw (not supplied) |
| SKU | TFD-F-RAW |
Three steps, no tools.
Pop the back panel off with a fingernail — there's a notch at the bottom for it.
Label up. It's cut for that exact case, so it seats on its own.
Both latches click. Hang it on one screw and slide it level once it's up.
TRUEFIT™